7xxx Series · Temper T6 · ASTM B209 / AMS-QQ-A-250/12 / EN AW-7075

7075-T6 Aluminum — Properties, Weight Calculator & Engineering Datasheet

Ultra-high-strength Al-Zn-Mg-Cu alloy rivaling structural steels in yield strength (505 MPa). Density 2.81 g/cm³ — assuming 2.70 underestimates mass by 4.07%.

Specific Strength (Rp0.2 / ρ)
179.7 kN·m/kg
True ρ = 2.81 g/cm³

Density (ρ)

2.81 g/cm³

2810 kg/m³ · 0.1015 lb/in³

Yield (Rp0.2)

505 MPa

73 ksi (0.2% offset)

Tensile (Rm)

570 MPa

83 ksi ultimate

Shear Strength (τu)

331 MPa

Ultimate shear

Fatigue Limit

159 MPa

5×10⁸ cycles RR Moore

Bearing Yield

786 MPa

e/D = 2.0 pin/rivet

Elongation (A)

11%

Min bend R ≈ 6×t

Modulus (E)

71.7 GPa

Shear G ≈ 27 GPa

Hardness

150 HB

Temper T6

α Thermal Exp.

23.4×10⁻⁶/K

20–100 °C linear

k Thermal Cond.

130 W/m·K

477 – 635 °C

Elec. Cond.

33% IACS

CNC Vc ≈ 450 m/min

Interactive Engineering Workbench · 7075-T6 Aluminum (ASTM B209 / AMS-QQ-A-250/12 / EN AW-7075)

7075-T6 Aluminum Live Calculator & Design Verification Suite

True Mass (2.81 g/cm³)
8.43 kg
18.58 lb (8.430 kg/pc)
If Assumed ρ = 2.70 g/cm³
8.10 kg
Δ = +0.33 kg (+4.07%)
Estimated Material Cost
$57.32
Vol: 3000 cm³ · A: 3000 mm²
Engineering Mass Traceability Note

7075-T6 Aluminum contains alloying elements (7xxx series) that shift its density to 2.81 g/cm³ (2810 kg/m³). On a 1-piece batch, generic 2.70 g/cm³ calculators miscalculate shipping and structural mass by 330 grams.

Chemical Composition Limits (wt% per ASTM B209 / AMS-QQ-A-250/12 / EN AW-7075)

Nominal elemental mass fractions governing density (2.81 g/cm³), precipitation hardening, and weldability.

EN 573-3 / AA Registered Limits
Al
87.1–91.4%
Cu
1.2–2.0%
Mg
2.1–2.9%
Mn
≤ 0.30%
Si
≤ 0.40%
Zn
5.1–6.1%
Cr
0.18–0.28%
Fe
≤ 0.50%

Standard Nominal Density vs Generic 2.70 g/cm³ Baseline

Nominal standard density for 7075-T6 Aluminum is 2.81 g/cm³ (2810 kg/m³ per ASTM B209 / AMS-QQ-A-250/12 / EN AW-7075). Assuming a generic 2.70 g/cm³ aluminum density introduces a +4.07% mass discrepancy across BOM, structural payload, and freight logistics calculations.

Normative Specification vs Lot Inspection: Values shown are normative nominal design baselines per ASTM B209 / AMS-QQ-A-250/12 / EN AW-7075 and EN 573-3. Lot-specific physical properties and chemical compositions are documented on manufacturer Mill Test Certificates (EN 10204 Type 3.1 / 3.2). Mechanical strength values represent standard minimum guarantees for extruded profiles (typically wall thickness t ≤ 5 mm); thicker gauges, plate products (EN 485), and specific tempers follow dedicated standard sub-clauses.

1 m² × 10 mm plate (True ρ = 2.81)

28.10 kg

Same plate if assumed ρ = 2.70

27.00 kg

Mass Discrepancy per Plate

+1.10 kg (2.43 lb)

Weldability (EN 1999 / AWS)

Poor

Join via mechanical fasteners (Hi-Lok, 2117-T4 AD rivets, or VDI 2230 bolts).

CNC Machinability

Good

Recommended 3-flute carbide Vc ≈ 450 m/min.

Corrosion & Anodizing

Fair

Melting range: 477 – 635 °C.

Typical Industrial Applications

  • • Aerospace wing spars & landing gear links
  • • Motorsport uprights & CNC sprockets
  • • Blow molds & ultrasonic horns
  • • Defense receivers & Ordnance

Engineering Pitfalls & Design Warnings

  • ⚠ Do NOT arc weld (severe micro-cracking)
  • ⚠ T6 temper is susceptible to Stress Corrosion Cracking (SCC) in short-transverse direction — specify 7075-T7351 or 7050-T7451 if exposed to salt/moisture

Compare 7075-T6 Aluminum & Explore All Aluminum Alloys

Methodology Tier 1 Normative Reference: ASTM B209 / AMS-QQ-A-250/12 / EN AW-7075 / EN 573-3 / EN 485-2 / MMPDS. Values are typical handbook figures for temper T6.