7xxx Series · Temper T7451 · AMS 4050 / ASTM B209 / EN AW-7050
7050-T7451 Aluminum — Properties, Weight Calculator & Engineering Datasheet
Thick-plate aerospace structural alloy (Al-Zn-Mg-Cu-Zr). Overaged T7451 temper eliminates Stress Corrosion Cracking (SCC) while preserving high fracture toughness in 50–150 mm hog-out plates.
Density (ρ)
2.83 g/cm³
2830 kg/m³ · 0.1022 lb/in³
Yield (Rp0.2)
469 MPa
68 ksi (0.2% offset)
Tensile (Rm)
524 MPa
76 ksi ultimate
Shear Strength (τu)
303 MPa
Ultimate shear
Fatigue Limit
165 MPa
5×10⁸ cycles RR Moore
Bearing Yield
710 MPa
e/D = 2.0 pin/rivet
Elongation (A)
11%
Min bend R ≈ 6×t
Modulus (E)
71.7 GPa
Shear G ≈ 27 GPa
Hardness
140 HB
Temper T7451
α Thermal Exp.
23.5×10⁻⁶/K
20–100 °C linear
k Thermal Cond.
157 W/m·K
488 – 629 °C
Elec. Cond.
41% IACS
CNC Vc ≈ 420 m/min
7050-T7451 Aluminum Live Calculator & Design Verification Suite
7050-T7451 Aluminum contains alloying elements (7xxx series) that shift its density to 2.83 g/cm³ (2830 kg/m³). On a 1-piece batch, generic 2.70 g/cm³ calculators miscalculate shipping and structural mass by 390 grams.
Chemical Composition Limits (wt% per AMS 4050 / ASTM B209 / EN AW-7050)
Nominal elemental mass fractions governing density (2.83 g/cm³), precipitation hardening, and weldability.
Standard Nominal Density vs Generic 2.70 g/cm³ Baseline
Nominal standard density for 7050-T7451 Aluminum is 2.83 g/cm³ (2830 kg/m³ per AMS 4050 / ASTM B209 / EN AW-7050). Assuming a generic 2.70 g/cm³ aluminum density introduces a +4.81% mass discrepancy across BOM, structural payload, and freight logistics calculations.
Normative Specification vs Lot Inspection: Values shown are normative nominal design baselines per AMS 4050 / ASTM B209 / EN AW-7050 and EN 573-3. Lot-specific physical properties and chemical compositions are documented on manufacturer Mill Test Certificates (EN 10204 Type 3.1 / 3.2). Mechanical strength values represent standard minimum guarantees for extruded profiles (typically wall thickness t ≤ 5 mm); thicker gauges, plate products (EN 485), and specific tempers follow dedicated standard sub-clauses.
1 m² × 10 mm plate (True ρ = 2.83)
28.30 kg
Same plate if assumed ρ = 2.70
27.00 kg
Mass Discrepancy per Plate
+1.30 kg (2.87 lb)
Weldability (EN 1999 / AWS)
Poor
Join via mechanical fasteners (Hi-Lok, 2117-T4 AD rivets, or VDI 2230 bolts).
CNC Machinability
Excellent
Recommended 3-flute carbide Vc ≈ 420 m/min.
Corrosion & Anodizing
Good
Melting range: 488 – 629 °C.
Typical Industrial Applications
- • Monolithic CNC wing bulkheads & fuselage frames
- • Fighter jet structural ribs
- • High-precision injection molds
- • Semiconductor vacuum chambers
Engineering Pitfalls & Design Warnings
- ⚠ Highest common aluminum density (2.83 g/cm³ — +4.8% heavier than 2.70)
- ⚠ Never fusion weld; join with aerospace interference-fit fasteners
Compare 7050-T7451 Aluminum & Explore All Aluminum Alloys
Methodology Tier 1 Normative Reference: AMS 4050 / ASTM B209 / EN AW-7050 / EN 573-3 / EN 485-2 / MMPDS. Values are typical handbook figures for temper T7451.