1xxx Series · Temper O / H14 · ASTM B209 / EN AW-1100

1100 Aluminum — Properties, Weight Calculator & Engineering Datasheet

Commercially pure aluminum (99.0% min Al). Exceptional corrosion resistance, thermal/electrical conductivity, and deep-drawing formability.

Specific Strength (Rp0.2 / ρ)
12.9 kN·m/kg
True ρ = 2.71 g/cm³

Density (ρ)

2.71 g/cm³

2710 kg/m³ · 0.0979 lb/in³

Yield (Rp0.2)

35 MPa

5 ksi (0.2% offset)

Tensile (Rm)

90 MPa

13 ksi ultimate

Shear Strength (τu)

62 MPa

Ultimate shear

Fatigue Limit

34 MPa

5×10⁸ cycles RR Moore

Bearing Yield

75 MPa

e/D = 2.0 pin/rivet

Elongation (A)

35%

Min bend R ≈ 0.5×t

Modulus (E)

69 GPa

Shear G ≈ 27 GPa

Hardness

23 HB

Temper O / H14

α Thermal Exp.

23.6×10⁻⁶/K

20–100 °C linear

k Thermal Cond.

222 W/m·K

643 – 657 °C

Elec. Cond.

59% IACS

CNC Vc ≈ 220 m/min

Interactive Engineering Workbench · 1100 Aluminum (ASTM B209 / EN AW-1100)

1100 Aluminum Live Calculator & Design Verification Suite

True Mass (2.71 g/cm³)
8.13 kg
17.92 lb (8.130 kg/pc)
If Assumed ρ = 2.70 g/cm³
8.10 kg
Δ = +0.03 kg (+0.37%)
Estimated Material Cost
$55.28
Vol: 3000 cm³ · A: 3000 mm²
Engineering Mass Traceability Note

1100 Aluminum contains alloying elements (1xxx series) that shift its density to 2.71 g/cm³ (2710 kg/m³). On a 1-piece batch, generic 2.70 g/cm³ calculators miscalculate shipping and structural mass by 30 grams.

Chemical Composition Limits (wt% per ASTM B209 / EN AW-1100)

Nominal elemental mass fractions governing density (2.71 g/cm³), precipitation hardening, and weldability.

EN 573-3 / AA Registered Limits
Al
≥ 99.0%
Cu
0.05–0.20%
Mg
≤ 0.05%
Mn
≤ 0.05%
Si
≤ 0.95% (Si+Fe)
Zn
≤ 0.10%
Cr
—
Fe
≤ 0.95% (Si+Fe)

Standard Nominal Density vs Generic 2.70 g/cm³ Baseline

Nominal standard density for 1100 Aluminum is 2.71 g/cm³ (2710 kg/m³ per ASTM B209 / EN AW-1100). Assuming a generic 2.70 g/cm³ aluminum density introduces a +0.37% mass discrepancy across BOM, structural payload, and freight logistics calculations.

Normative Specification vs Lot Inspection: Values shown are normative nominal design baselines per ASTM B209 / EN AW-1100 and EN 573-3. Lot-specific physical properties and chemical compositions are documented on manufacturer Mill Test Certificates (EN 10204 Type 3.1 / 3.2). Mechanical strength values represent standard minimum guarantees for extruded profiles (typically wall thickness t ≤ 5 mm); thicker gauges, plate products (EN 485), and specific tempers follow dedicated standard sub-clauses.

1 m² × 10 mm plate (True ρ = 2.71)

27.10 kg

Same plate if assumed ρ = 2.70

27.00 kg

Mass Discrepancy per Plate

+0.10 kg (0.22 lb)

Weldability (EN 1999 / AWS)

Excellent

TIG/MIG weldable using ER4043 or ER5356 filler wire.

CNC Machinability

Poor

Recommended 3-flute carbide Vc ≈ 220 m/min.

Corrosion & Anodizing

Excellent

Melting range: 643 – 657 °C.

Typical Industrial Applications

  • • Chemical tanks
  • • Heat exchangers & fins
  • • Busbars & nameplates
  • • Food & brewing equipment

Engineering Pitfalls & Design Warnings

  • ⚠ Too soft for structural frames
  • ⚠ Gummy machining — use polished carbide tools with high rake angle (45° helix)

Compare 1100 Aluminum & Explore All Aluminum Alloys

Methodology Tier 1 Normative Reference: ASTM B209 / EN AW-1100 / EN 573-3 / EN 485-2 / MMPDS. Values are typical handbook figures for temper O / H14.