5xxx Series · Temper H32 · ASTM B209 / EN AW-5052

5052-H32 Aluminum — Properties, Weight Calculator & Engineering Datasheet

Workhorse precision sheet metal & marine alloy. Tight bend radii without cracking, superior fatigue strength among medium-strength sheets.

Specific Strength (Rp0.2 / ρ)
72.0 kN·m/kg
True ρ = 2.68 g/cm³

Density (ρ)

2.68 g/cm³

2680 kg/m³ · 0.0968 lb/in³

Yield (Rp0.2)

193 MPa

28 ksi (0.2% offset)

Tensile (Rm)

228 MPa

33 ksi ultimate

Shear Strength (τu)

138 MPa

Ultimate shear

Fatigue Limit

117 MPa

5×10⁸ cycles RR Moore

Bearing Yield

310 MPa

e/D = 2.0 pin/rivet

Elongation (A)

12%

Min bend R ≈ 1.5×t

Modulus (E)

70.3 GPa

Shear G ≈ 27 GPa

Hardness

60 HB

Temper H32

α Thermal Exp.

23.8×10⁻⁶/K

20–100 °C linear

k Thermal Cond.

138 W/m·K

607 – 649 °C

Elec. Cond.

35% IACS

CNC Vc ≈ 310 m/min

Interactive Engineering Workbench · 5052-H32 Aluminum (ASTM B209 / EN AW-5052)

5052-H32 Aluminum Live Calculator & Design Verification Suite

True Mass (2.68 g/cm³)
8.04 kg
17.73 lb (8.040 kg/pc)
If Assumed ρ = 2.70 g/cm³
8.10 kg
Δ = -0.06 kg (-0.74%)
Estimated Material Cost
$54.67
Vol: 3000 cm³ · A: 3000 mm²
Engineering Mass Traceability Note

5052-H32 Aluminum contains alloying elements (5xxx series) that shift its density to 2.68 g/cm³ (2680 kg/m³). On a 1-piece batch, generic 2.70 g/cm³ calculators miscalculate shipping and structural mass by 60 grams.

Chemical Composition Limits (wt% per ASTM B209 / EN AW-5052)

Nominal elemental mass fractions governing density (2.68 g/cm³), precipitation hardening, and weldability.

EN 573-3 / AA Registered Limits
Al
95.7–97.7%
Cu
≤ 0.10%
Mg
2.2–2.8%
Mn
≤ 0.10%
Si
≤ 0.25%
Zn
≤ 0.10%
Cr
0.15–0.35%
Fe
≤ 0.40%

Standard Nominal Density vs Generic 2.70 g/cm³ Baseline

Nominal standard density for 5052-H32 Aluminum is 2.68 g/cm³ (2680 kg/m³ per ASTM B209 / EN AW-5052). Assuming a generic 2.70 g/cm³ aluminum density introduces a -0.74% mass discrepancy across BOM, structural payload, and freight logistics calculations.

Normative Specification vs Lot Inspection: Values shown are normative nominal design baselines per ASTM B209 / EN AW-5052 and EN 573-3. Lot-specific physical properties and chemical compositions are documented on manufacturer Mill Test Certificates (EN 10204 Type 3.1 / 3.2). Mechanical strength values represent standard minimum guarantees for extruded profiles (typically wall thickness t ≤ 5 mm); thicker gauges, plate products (EN 485), and specific tempers follow dedicated standard sub-clauses.

1 m² × 10 mm plate (True ρ = 2.68)

26.80 kg

Same plate if assumed ρ = 2.70

27.00 kg

Mass Discrepancy per Plate

-0.20 kg (-0.44 lb)

Weldability (EN 1999 / AWS)

Excellent

TIG/MIG weldable using ER4043 or ER5356 filler wire.

CNC Machinability

Fair

Recommended 3-flute carbide Vc ≈ 310 m/min.

Corrosion & Anodizing

Excellent

Melting range: 607 – 649 °C.

Typical Industrial Applications

  • • Precision sheet metal enclosures
  • • Marine fuel & water tanks
  • • Electronic chassis & server racks
  • • Hydraulic tubing

Engineering Pitfalls & Design Warnings

  • ⚠ Not heat-treatable — strength comes from strain hardening
  • ⚠ Weld HAZ locally softens H32 temper to ~O-temper yield (90 MPa)

Compare 5052-H32 Aluminum & Explore All Aluminum Alloys

Methodology Tier 1 Normative Reference: ASTM B209 / EN AW-5052 / EN 573-3 / EN 485-2 / MMPDS. Values are typical handbook figures for temper H32.