Solvers/

Thin & Thick-Walled Pressure Vessel

FORMULA SOLVERASME BPVC Section VIII Div 1EN 13445

Deterministic engineering intelligence platform for mechanical, structural, and electrical designers. Standard-referenced calculation engines, 3D CAD workspace, and transparent engineering equations.

Loading...
▸Formula · assumptions · example(ASME BPVC Section VIII Div 1 · EN 13445 · AD 2000-Merkblatt)

Formula

tshell=P⋅RS⋅E−0.6P+CA,thead=P⋅D⋅K2S⋅E−0.2P+CAt_{\text{shell}} = \frac{P \cdot R}{S \cdot E - 0.6 P} + CA, \quad t_{\text{head}} = \frac{P \cdot D \cdot K}{2 S \cdot E - 0.2 P} + CA

ASME Boiler & Pressure Vessel Code (BPVC) Section VIII Division 1 thin-wall shell and 2:1 ellipsoidal head minimum wall thickness.

Assumptions

  • · Thin-wall cylindrical pressure boundary condition satisfied: t/R ≤ 0.5
  • · Joint efficiency factor E assigned based on radiographic examination category (E = 0.85 to 1.0)
  • · Corrosion allowance (CA) added directly to calculate minimum required nominal fabrication thickness
REFERENCE BASELINE EXAMPLE

Worked example — Air Receiver (P = 1.6 MPa, Internal R = 400 mm, S = 138 MPa, E = 1.0, CA = 2 mm)

Calculates required shell thickness t = 4.67 mm + 2.0 mm CA = 6.67 mm (standard 8 mm pressure vessel steel plate selected).