Solvers/
High-Cycle Fatigue & Goodman / Gerber Life
CAE WORKSTATIONASTM E466 (Axial fatigue)DIN 50100 (Wöhler S-N testing)Deterministic engineering intelligence platform for mechanical, structural, and electrical designers. Standard-referenced calculation engines, 3D CAD workspace, and transparent engineering equations.
Loading...
▸Formula · assumptions · example(ASTM E466 (Axial fatigue) · DIN 50100 (Wöhler S-N testing) · FKM Guideline (Analytical strength))
Formula
High-cycle fatigue life assessment under fluctuating stress cycles with mean stress corrections (Goodman, Gerber, Soderberg).
Assumptions
- · Marin endurance limit correction factors applied: surface finish ka, size kb, reliability kc, temperature kd
- · Fatigue notch factor Kf = 1 + q(Kt - 1) computed using Neuber notch sensitivity q
- · Infinite life target validated when alternating stress σa remains strictly below endurance limit Se
REFERENCE BASELINE EXAMPLE
Worked example — Stepped Shaft under Fluctuating Load (σmax = 280 MPa, σmin = 40 MPa, Sut = 600 MPa, Se = 220 MPa)
Alternating stress σa = 120 MPa, mean stress σm = 160 MPa. Modified Goodman safety factor nf = 1.23 against infinite fatigue life limit.