Thread Stripping Area Calculator & Guide - AluCalc
Computes the thread shear area of the bolt and of the nut thread for an ISO metric basic profile, the load at which the weaker one strips, and the engagement-to-diameter ratio.
Mathematical Definition
Real-Time Solver
Parameters Configuration
Interactive SolverCalculation Procedure
- 1
Enter d, P, L_e and the shear strength τ of the internal thread material.
- 2
The tool takes d_2 = d − 0.649519·P and D_1 = d − 1.082532·P (ISO 68-1 basic profile, no tolerance reduction).
- 3
It evaluates the bolt and nut shear areas and F_strip from the smaller one.
- 4
It flags L_e/d below 0.8 as critical and below 1.2 as a warning.
Practical Engineering Application
Basic-profile dimensions without tolerance reduction, so real stripping loads are lower for loose fits. It does not check bolt tensile strength; compare F_strip with the bolt load separately.
Worked Reference Example
M12 × 1.75 with L_e = 14 mm and τ = 210 MPa gives A_SB = 333.3 mm², A_SN = 461.8 mm², F_strip = 70.0 kN and L_e/d = 1.17 (warning).